FOAM PAD FOR BOTTOM
(QUANTITY 1)
1
1
2
Rev
2207
Record the key number and serial number from the back of the cabinet.
Keep keys in a secure place away from children.
Do not store this document in the cabinet
Instructions
GCM-1918-DXD
GCM-1918-DXF
GCM-1918-DXTX
PARTS INCLUDED
Serial #:
Key #:
WARNING
Tip Over Hazard
A child or adult can tip the cabinet and be killed or
seriously injured.
Failure to secure the cabinet as shown in these
instructions can result in death or serious injury to
children and adults.
Children should not play with or around the
cabinet at any time.
IMPORTANT:
Tools Required:
Phillips screwdriver
7/16” wrench
drill
3/16” drill bit
Scissors
Hardware included:
(22) 8-32 x 1/2 machine screw
(22) 8-32 nut
(12) 8 x 1/2 screw
PLASTIC PLUG
(QUANTITY 2)
SCOPE REST
(QUANTITY 4)
5-POSITION BARREL REST
(QUANTITY 2)
4-POSITION BARREL REST
(QUANTITY 2)
®
WARNING: This product can expose you to chemicals
including Di(2-ethylhexyl)phthalate (DEHP) which is known
to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
REGISTER THIS PRODUCT
For warranty and customer support, please register this
product at “www.Stack-On.com/product-registration”
THE BARREL RESTS MUST BE INSTALLED BEFORE
MOUNTING THE CABINET TO A WALL AND FLOOR.
Installation of Barrel Rests
Install the 4-position barrel rests (A) to the back of the cabinet and the
Align the holes of the barrel rest over the tips of the screws and lightly
press the barrel rest into place. Now tighten the screws from the
outside of the cabinet. Tighten each screw partially, alternating from
one screw to the other until they are both tight. Do not over tighten.
2
A
B
1
INSTALLATION OF BARREL RESTS
