![stabo Smart i_control 51092 Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/stabo/smart-i_control-51092/smart-i_control-51092_user-manual_1356731027.webp)
-
26
-
5.8.1 Network Status
Activate or disable the network link for remote access.
1.
Press [ENTER] button entering “Online Status” menu. By default, the NVR
is in “ONLINE” status
2.
Use [LEFT / RIGHT] buttons to change the status
3.
Press [ENTER] button to confirm change; OR [MENU] button to exit
Note: When the NVR is OFFLINE, user will not be able to remote access NVR
5.8.2 Firmware Update
To update the firmware of NVR or camera unit
1.
Insert a Micro SD card containing new firmware (BIN format) into the card
slot at the back panel of the Receiver.
File Name
Description
FW_TX.BIN
Camera Unit firmware
FW_RX.BIN
NVR firmware
FW_98600.B
IN
Network firmware
2.
Press [ENTER] to go into
the “Firmware Update” menu. Firmware version
information will be shown on right-hand side of the screen. For example,
3.
Use [LEFT / RIGHT] buttons to select to update NVR/P2P (left hand side
NVR image) or Camera (right hand side camera image).