![stabo Smart i_control 51092 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/stabo/smart-i_control-51092/smart-i_control-51092_user-manual_1356731012.webp)
-
11
-
5.2.1 Pairing
Register camera to NVR to transmit Live Video.
Label under camera icons:
– This camera channel is available for pairing
– This camera channel is registered with a camera
– Pairing in progress
– Pairing failed. Please check camera and try again
Pairing the camera:
1. Press [ENTER] button to start. By default, camera channel 1 is selected
(RED colour).
2. Use UP / DOWN / LEFT / RIGHT] key to select a camera channel
3. Select
channel to add a new camera; OR
4. Select
channel to replace current camera
5. Make sure the camera is connected to power source
– Power LED turns RED,
then BLUE signal LED ON or Flashing. Press [ENTER] key to start pairing.
Label changes to
6.
Now press the camera “Pairing” button (See section 1, camera image) to pair
with the NVR
7. When pairing succeeds, label changes to
8. If paring fails, label changes to .
Then user has to check again the
camera and the NVR condition.