ST X-NUCLEO-LED12A1, Руководство пользователя

Страница: 3 / 17

2 Connectors
The X-NUCLEO-LED12A1 expansion board allows the user to test the functionality of the LED1202 , together with
the use of the additional LED panel board.
The 4
LED1202 ICs and the STM32 Nucleo development board are connected through CN5, CN6, CN8 and CN9
connectors (see the tables below).
Table 1. Interconnections between X-NUCLEO-LED12A1 expansion board and NUCLEO-L073RZ
development board (left side)
Signal Connector Pin number NUCLEO-L073RZ X-NUCLEO-LED12A1
NC
CN6 Power
1 - -
IOREF 2 - (NC)
RESET 3 - -
3V3 4 - 3V3
5V 5 - 5V (VDD)
GND 6 - GND
GND 7 - GND
VIN 8 - -
A0
CN8 Power
1 PA0 IRQ_MCU (alt.)
A1 2 PA1 IRQ_MCU (alt.)
A2 3 PA4 IRQ_MCU (alt.)
A3 4 PB0 IRQ_MCU (alt.)
A4 5 PC1 NC
A5 6 PC0 NC
Table 2. Interconnections between X-NUCLEO-LED12A1 expansion board and NUCLEO-L073RZ
development board (right side)
Signal Connector Pin number NUCLEO-L073RZ X-NUCLEO-LED12A1
D15
CN5 Digital
10 PB8 SCL_MCU
D14 9 PB9 SDA_MCU
AVDD 8 AVDD NC
GND 7 GND NC
D13 6 PA5 NC
D12 5 PA6 NC
D11 4 PA7 NC
D10 3 PB6 NC
D9 2 PC7 NC
D8 1 PA9 NC
D7
CN9 Digital
8 PA8 NC
D6 7 PB10 NC
D5 6 PB4 NC
D4 5 PB5 NC
UM2879
Connectors
UM2879 - Rev 2
page 3/17