1
Getting started
1.1
Safety considerations
1.1.1
Electrostatic precautions
Warning:
Take electrostatic precautions, including ground straps, when using the
expansion board. Failure to prevent electrostatic discharge could damage the device.
Figure 2.
Electrostatic logo
1.1.2
Laser safety considerations
The
contains a laser emitter and the corresponding drive circuitry.
The laser output is designed to remain within Class 1 laser safety limits under all reasonable foreseeable
conditions, including single faults, in compliance with the IEC 60825-1:2014 (third edition).
The laser output remains within Class 1 limits as long as you use the STMicroelectronics recommended device
settings and respect the operating conditions specified in the data sheet.
The laser output power must not be increased and no optics should be used with the intention of focusing the
laser beam.
Figure 3.
Class 1 laser product label
1.2
Features
•
Time-of-Flight 8x8 multizone ranging sensor with 90° FoV
•
Accurate absolute ranging distance, independent of the reflectance of the target
•
Up to 350 cm ranging
•
Histogram-based technology
•
Multiobject detection capability
•
0.25, 0.5, and 1 mm spacers to simulate air gaps
•
One cover glass to protect the sensor from dust
•
Compatible with
•
Equipped with Arduino® UNO R3 connectors
•
Full system software supplied, including code examples and graphical user interface
•
RoHS, CE, UKCA, and China RoHS compliant
UM3067
Getting started
UM3067
-
Rev 1
page 2/22