Introduction
The
development board equipped with the Arduino R3
connectors. It provides a complete evaluation kit that allows you to learn, evaluate, and develop applications using the
Time-of-Flight sensor with extended range measurement.
The expansion board is delivered with a cover glass holder in which you can fit three different spacers of 0.25, 0.5, and 1 mm
height below the cover glass to simulate various air gaps. A small oval cover glass fitting the sensor is included.
Several ST expansion boards can be stacked through the Arduino connectors, which allow, for example, the development of
applications with Bluetooth or Wi-Fi interfaces.
Figure 1.
X-NUCLEO-53L4A2 expansion board, spacers, cover glass holder, and oval cover glass
Getting started with the X-NUCLEO-53L4A2 expansion board for STM32 Nucleo
based on the VL53L4CX
UM2976
User manual
UM2976
-
Rev 1
-
December 2021
For further information contact your local STMicroelectronics sales office.
www.st.com