
The
generates the development IDE project. The MCU is directly flashed through the IDE or
. At the end of this operation, the DPC application is tested and debugged through
. The digital power converter firmware is then released, if compliant, and the DPC is adapted.
The
reference design power converter allows managing the energy flow. The figure below
shows the algorithm schematic diagram of the implementation in the AC-DC rectifier application.
Figure 51.
AC-DC rectifier application
The figure below shows the basic representation of the execution flow. A current decoupling control well fitted for
this application is used. This allows managing the energy flow in terms of AC current.
Figure 52.
Simplified execution task of the control in AC-DC
4.1
Configuration files
The
power converter configuration is based on two main configuration files.
UM2975
Configuration files
UM2975
-
Rev 1
page 30/63