Introduction
The
dynamic NFC/RFID tag IC expansion board is based on the
dynamic NFC/RFID
tag IC with a 64-Kbit dual interface EEPROM and fast transfer mode feature. It can be powered through the
development board or directly through the received carrier electromagnetic field.
The
expansion board is compatible with the Arduino UNO R3 connector pin assignment and can easily
be plugged onto any
development board. You can stack other expansion boards to evaluate different devices
that work together with the dynamic NFC tag.
The board also features a single-layer antenna with a diameter of 54 mm and copper etched on the PCB.
The expansion board package with order code
contains the X$NUCLEO-NFC07A board.
Figure 1.
X-NUCLEO-NFC07A1 expansion board
Getting started with the X-NUCLEO-NFC07A1 NFC/RFID tag IC expansion board
based on ST25DV64KC for STM32 Nucleo
UM2960
User manual
UM2960
-
Rev 2
-
March
2022
For further information contact your local STMicroelectronics sales office.
www.st.com