•
solution (KNX-RF stack hosted by BLE SoC)
•
solution (KNX-RF stack hosted by STM32 microcontroller)
For Push Button KNX-RF application, two configurations are available:
•
RGBLedPushButton_IDB008V2_KNX
+
boards
•
RGBLedPushButton_STM32L073
Figure 131.
Push Button application configurations
For Led Actuator KNX-RF application, 2 configurations are also available:
•
RGB_Actuator_BlueNRG
for
•
RGB_Actuator_STM32L073
for
boards
Figure 132.
LED actuator application configurations
5.2.2
Keil project debug
evaluation kits (
), debug is possible using an additional debug probe (
).
Figure 133.
Keil project examples
With
) setup,
is integrated and there is no need for an extra device to
debug the software.
UM2920
KNX-RF project examples
UM2920
-
Rev 1
page 63/71
