Figure 73.
Push button application
Figure 74.
LED actuator application
To monitor KNX communication on both KNX bus (KNX-TP devices) and KNX-RF interface, a dummy device is
configured in ETS tool.
Figure 75.
Dummy device configuration
4.1.6
ETS group monitor
By clicking on [
ETS
] and then on [
Diagnostics
], you can monitor communication activity in the ETS system.
Note:
Only the KNX devices of your setup will be monitored.
UM2920
ETS5 setup through Tapko RF/TP coupler
UM2920
-
Rev 1
page 43/71
