manualshive.com logo in svg

ST STM32303C-EVAL, Руководство пользователя

Поделиться
Скачать
ST STM32303C-EVAL Скачать руководство пользователя страница 21

UM1590

Running the demonstration

Doc ID 023892 Rev 1

21/65

         

2.3.4 Internal 

memory 

size

Figure 14.

Internal Flash memory organization

2.3.5 

External memory organization

The STM32303C-EVAL demonstration is based on an embedded free FAT file system, 
FatFs. The file system is needed to read all media information from the on-board MicroSD 
card memory. The MicroSD card memory is organized in three subdirectories:

●

STFILES: this directory contains all the required demonstration media files (icons). 
User files located in this folder cannot be handled by the demo; only default files are 
managed. 

●

USER: this is a user folder. The user can add his/her own files here to be played inside 
the demonstration menus (pictures and waves). This folder is used only by the Image 
Viewer and Wave Player submenus. For more details on the various files properties, 
please refer to 

Section 2.4.2: Image Viewer submenu

 and 

Section 2.4.3: Audio 

features

.

Caution:

The STFILES directory and its internal files are mandatory for demonstration startup. FatFs 
is a generic FAT file system module for small embedded systems. The FatFs is written in 
compliance with ANSI C and completely separated from the disk I/O layer. For more details, 
refer to the following link: 

http://elm-chan.org/fsw/ff/00index_e.html

.

Table 4.

STM32F30x/31x demonstration external interrupts

External interrupts

Used for

EXTI line 5

Key Button (interrupt mode, rising edge)

Joystick DOWN (interrupt mode, falling edge)

Joystick LEFT (interrupt mode, falling edge)

EXTI line 6

MicroSD Card detect (interrupt mode, rising edge)

KEY Button (interrupt mode, rising edge)

Joystick RIGHT (interrupt mode, falling edge)

EXTI line 7

Joystick UP((interrupt mode, falling edge)

EXTI line 13

Joystick SEL (interrupt mode, falling edge)

EXTI line 17

RTC Alarm (interrupt mode, rising edge)

MS31111V2

STM32F303VCT6

0x083FFFF

0x0800000

Содержание STM32303C-EVAL


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды