UM0935
Running the IBU UI tool
Doc ID 17398 Rev 3
15/53
3
Running the IBU UI tool
To run the board, connect it to the PC with the USB mini B-type cable.
As soon as the board is powered using the USB mini-B cable, power LED D2 lights up. If this
LED fails to light up, take the following steps:
1.
Check if the USB cable is working properly or not
2.
Press the SW1 reset button.
As a result, the board should be enumerated as an IBU universal interface tool and it is
shown as “STM32 based IBU UI Tool”, as shown in Figure 9, in the device manager window.
If this message does not appear, please contact technical support.
Figure 9.
Enumeration result
Once this is done, the user can use their own customized GUI to connect to the board.
The user can create their own GUI using the DLLs provided in the package along with the
board. The DLL help file is also available along with the package.
Содержание STEVAL-PCC009V2
Страница 4: ...Contents UM0935 4 53 Doc ID 17398 Rev 3 Appendix D Tables and figures 50 Revision history 52...
Страница 42: ...UM0935 Schematics and BOM list Doc ID 17398 Rev 3 42 53 Figure 32 10 pin com interface V...
Страница 43: ...Schematics and BOM list UM0935 43 53 Doc ID 17398 Rev 3 Figure 33 30 pin com interface V...
