4
Hardware description
4.1
Hardware features
The SPC58NHADPT386S Rev. C "mini module" board has the following features:
•
Connector for external power supplies input (5 V) used in stand-alone mode
•
Reset button with driver and led indicator
•
Socket for device in FPBGA386 package
•
Debug interfaces:
–
14-pin header connector for JTAG interface
–
10-pin header connector for JTAG/LFAST LVDS interface
–
10-pin header connector for SIPI interface
–
38-pin Nexus parallel debug connector
•
40 MHz crystal main oscillator with jumpers to optionally disconnect it
•
8 MHz oscillator with jumpers to optionally disconnect it
•
Clock input through SMA connector with jumper to optionally disconnect it
•
2 X Samtec QSH series, 240-way connector to connect mini module to motherboard
•
1 Gb/s Ethernet port
•
HyperRAM and HyperFlash connected to HyperBUS interface
•
Embedded eMMC device
•
SD/MMC card reader
•
3 x Header connectors 5x2 with 0.1” (CIS, ISU and AI connectors)
4.2
Hardware dimensions
The "mini module" has the following dimensions:
•
PCB area: 157 mm x 114.3 mm
•
Top components height: 19 mm max
•
Bottom components height: 3.5 mm max
UM2789
Hardware description
UM2789
-
Rev 1
page 6/36