ST G3-PLC, Руководство пользователя

Страница: 14 / 52

G3LIB menu UM1811
14/52 DocID026814 Rev 1
Below this SET command, a list of options or a text box allows providing the value with
which the selected attribute is set.

G3LIB-SWRESET.Request: this command performs a software reset of the G3-PLC
protocol stack (RTE and non-RTE part.).

G3LIB-GET/SET.confirm: these commands are used to get asynchronous confirm
message from the application to the connected device. Note that the “Confirm”
message is sent automatically by the application as described in
Section 3.4 on page
12 .
4.2 G3LIB IB EX menu
IB-EX stands for the information base explorer. This menu offers the user the ability to
read/modify any attribute of the library information base.
It is made of a white board in which the user can drag and drop the desired attribute from
the list on the left side.
Figure 8. G3LIB information base explorer
More than one attribute may be added in the white board. A generic set/get method is then
available to write/read the attribute.