3 Connecting to the application board
AD-ICD
8/15
3.1
Connection for DIP8 microcontroller package
1.
Solder the DIP8 Device adapter (DB646) onto your application board in place of your
microcontroller.
2.
Plug the ICC cable from the in-circuit debugging tool into the 10-pin ICC connector on
the top of the ICD Adapter (MB509).
3.
Align the pin 1 indicator on the ICD Adapter (MB509) with the pin 1 indicator for the
DIP8 Device adapter on your application board and insert the pins into the 8-pin
connector on the bottom of the ICD Adapter.
Figure 7.
DIP8 connection scheme
Pin 1 indicators
ICC cable
Application board
DIP8 Device adapter
(DB646)
ICD Adapter (MB509)
10-pin ICC Connector