ST A
UDIO
DSP24 ADAT
- 33 -
•
select
Audio & Hardware Drivers
and select
ASIO ADSP 24
as ASIO device.
If you want to work with 24-bit resolution, enable the option
20/24 Bit
Recording
.
•
exit Logic and launch it again to activate the settings.
Please also refer to the documentation of Logic SoundTrack24.
Setting up Steinberg Cubase VST/24 3.72
Cubase VST 3.72 from Steinberg uses the ASIO specification to access recording
hardware. Steinberg has defined ASIO and improved support for recording
multiple channels at the same time. ASIO features reduced latency for playback of
VST plugins and instruments. Please note, that other Steinberg programs (like
Nuendo, Cubasis VST or Cubase VST 5.x) have a very similar setup when using
the ASIO driver. To setup the DSP24 ADAT in Cubase VST, please follow these
steps:
•
call the
H/W setting
dialog inside
External Links
.
•
Select the ASIO buffer size. On faster systems (Pentium III, Athlon) it is
usually safe to use
512
as a small setting. On other systems you may try this
setting but increase the buffer size later, depending on the performance. Also
you can decrease the buffer size but please test if the performance is OK on
your specific system.
