WC2-FKP65
Textron Wildcat
6.5” Speaker Front Kick Panels
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against
defects in material or workmanship. All SSV Works Electronics are covered by a
limited 1 year warranty against defects in material or workmanship. All SSV Works
Speakers are covered by a limited 1 year warranty against defects in material or
workmanship. Labor for replacement of defective components is not covered.
Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
PARTS LIST IMAGES
2. M6 x 16mm
Screws x 12
1. WC2-FKP65
Enclosures (1 pair)
3. M6 Washers x 12
- T-30 Torx Driver
- Drill with 1/4” Drill bit
- Phillips Screwdriver
- Scribe or Punch tool
A. Bolt down the pod brackets like above
using five (5) M6 Screws and Washers.
B. Set the unloaded pod in place and mark the top mounting
location with a scribe or punch tool on to the floorboard.
C. With a 1/4” drill bit, drill the screw hole for mounting the
speaker pod.
A
B
C
4. #7 Screws x 8
