SST Automation GT200-HT-RS, Руководство пользователя

Страница: 28 / 52

WWW.SSTCOMM.COM 28
Configuration Mode: basic and advanced optional, “basic” is shown as above, “advanced” configuration can
refer to chapter 4.2.4.7;
Mode of outputting command: You can use the execution way of the command, change-of-state, polling
output, Initialization output and disable output optional;

Change-of-state output: Execute this command once s data buffer of HART changes

Polling output: This order is put in the polling list, executed periodically

Initialization output: Execute the command only once when power is on

Disable output: the command will not be sent.
Memory starting address of sending data: Set the memory starting address of output data by this command,
the range is 3000~3999;
Modbus register starting address of sending data: the property is automatically calculated by gateway, used
for register addressing;
Sending data length (BYTE): used to set the length of output data by this command;
Sending data length (WORD): the property is automatically calculated by gateway, used for user checking
output data length, 1 word=2 byte;
Memory starting address of receiving data: set the memory address of input data by this command. Response