SSI METEORLITE Скачать руководство пользователя страница 1

STROBE LIGHT

WARRANTY AND INSTALLATION

INSTRUCTIONS

FIVE YEAR WARRANTY

This light is warranted against defects in materials and workmanship for 

five years from the date of purchase. Should service be required, the light 

will either be repaired or replaced as covered by this warranty.  Customer 

should return product for warranty consideration. Shipping will be prepaid 

via  ground  transportation  by  consumer.  All  products  requiring  warranty    

service shall be returned within five years from the date of purchase. Exclu-

sions from this warranty include the product finish and damage caused by 

improper installation.

The manufacturer assumes no liability for costs incurred in removing

or reinstalling products requiring service.

This warranty gives you specific legal rights. You may also have other

rights which vary from state to state and country to country.

EL510-2250

INSTALLATION INSTRUCTIONS

®

16355 SOUTH LONE ELM ROAD

OLATHE, KANSAS 66062

 • 

USA

TOLL FREE:

 800-447-3693

 • PHONE: 

913-780-1440

 • FAX:

 913-780-1427  

www.superiorsignals.com

Maintenance:

•  Normal cleaning of the dome/lens can be done using mild soap and a soft  

  cloth. (Do not use cleaning agents such as solvents or petroleum products,    

  these can damage the lens).

•  Should the lens become scratched or hazy, this can normally be removed by  

  using a non-abrasive quality automotive paste cleaner-wax, or plastic polish.

Replacement LED Light Towers:

Class I P/N’s: 

Amber LED Lamp  

SY22050-TWR2-A

   

 

Blue LED Lamp    

SY22050-TWR2-B

   

 

Red LED Lamp   

SY22050-TWR2-R

EA13 P/N’s: 

Amber LED Lamp  

SY22050-TWR3-A

Replacing LED Lamp Towers:

1.   Disconnect the two LED Lamp wire connectors from the strobe base.

2.   Remove (3) #6 screws (located at the base of the flash tube) and remove   

    by lifting straight up.

3.   Note LED Lamp orientation and replace with new Lamp in original location    

    as shown in figure below.

4.   Reconnect the two wire connectors from the new LED Lamp to the strobe  

     base.

Отзывы: