SRS Labs SR430 Скачать руководство пользователя страница 12

Страница: 12 / 146

SR430 Multichannel Scaler

string.

SVTR

Save the Trace Data to the file specified by FNAM.

SVST

Save the Settings to the file specified by FNAM.

SVSS

Save the System Configuration to the file specified by FNAM.

RCTR

Recall the Trace Data from the file specified by FNAM.

RCST

Recall the Settings from the file specified by FNAM.

RCSS

Recall the System Configuration from the file specified by FNAM.

MATH

SMTH i

Smooth the data using 5 pts (0), 11 pts (1), 17 pts (2), 21 pts (3), or 25 pts (4).

FTYP(?) {i}

Set the Fit Type to Line (0), Exponential (1), or Gaussian (2).

FITS

Start the Fit Calculation.

PARS? i

Query Fit Parameter t0 (0), a (1), b (2), or c (3).

LLIM(?) {i}

Set the Left Limit of the curve fit region to bin #i where 0 ≤ i < Right Limit.

RLIM(?) {i}

Set the Right Limit of the curve fit region to bin #i where Left Limit < i ≤ Last bin in record.

CALC

Start a Calculation

ARGT(?) {i}

Set the calculation Argument type to Constant (0), or File (1).

ARGM(?) {i}

Set the Constant Argument to x.

STAT

Start the Statistical Calculations.

SPAR? i

Query Statistical Parameter mean (0), deviation (1), area (2), baseline area (3).

PRINT AND PLOT

PRSC

Print the screen. Same as [PRINT] key.

PALL

Plot the entire screen.

PTRC

Plot the trace only.

PCUR

Plot the cursor only.

DATA ACQUISITION CONTROL

SSCN

Start data acquisition. Same as [START] key.

PAUS

Pause a scan in progress. Same as [STOP] key while BUSY.

CLRS

Reset the data memory. Same as [STOP] key while DONE.

SCAN?

Query the number of records which have been accumulated so far.

DATA TRANSFER

BINA? {i}

Read the entire data record in ASCII format. If i included, read only bin #i data.

BINB?

Read the entire data record in binary format.

INTERFACE

*RST

Reset the unit to its default configurations.

*IDN?

Read the SR430 device identification string.

LOCL(?) {i}

Set the Local/Remote state to LOCAL (0), REMOTE (1), or LOCAL LOCKOUT (2).

STATUS

*CLS

Clear all status registers.

*ESE(?) {i}

Set the Standard Status Byte Enable Register to the decimal value i (0-255).

*ESR? {i}

Query the value of the Standard Status Byte. If i is included, only bit i is queried.

*SRE(?) {i}

Set the Serial Poll Enable Register to the decimal value i (0-255).

*STB? {i}

Query the value of the Serial Poll Status Byte. If i is included, only bit i is queried.

*PSC(?) {i}

Set the value of the Power-On Status Clear bit to Set (1) or Clear (0).

ERRE(?) {i}

Set the Error Status Enable Register to the decimal value i (0-255).

ERRS? {i}

Query the value of the Error Status Byte. If i is included, only bit i is queried.

MCSE(?) {i}

Set the MCS Status Enable Register to the decimal value i (0-255).

MCSS? {i}

Query the value of the MCS Status Byte. If i is included, only bit i is queried.

Содержание SR430



















































































































































Результаты поиска

Содержание SR430

Отзывы:

SRS Labs SR430, Руководство пользователя, Страница: 12 / 146

Результаты поиска

Содержание SR430

Отзывы: