Copyright By SRC
Design and Specification are subjected to change
Page 4
Ensure the Side Panels are flush
mounted on top of the Bracket LH & RH,
as shown, and the bolts tightened fully
Rear Rack as shown “Final
Assembled condition”
Step 4:
Slip in the Spacer (3) – 4 off in between the
Bracket LH/RH and the Rear Rack and slip-in the
Washer M6 (6) and Screw M6 x 25 (7) through the
Mounting holes in the Rear Rack and Brackets and,
secure from the bottom, using the Nuts (M6) (8) –
4 off and tighten it to the torque as shown in the
BOM table
