89
Lower Leg Assembly
L o w e r L e g A s s e m b l y
5 0 / 2 0 0 H o u r S e r v i c e
L o w e r L e g I n s t a l l a t i o n
Clean the upper tubes.
Install the lower leg assembly onto the upper tubes and slide it just
enough to engage the upper bushings with the upper tubes.
NOTICE
Make sure both wiper seals slide onto the tubes without folding the
outer lip of either seal.
The inside bottom of the lower leg should not contact the spring or
damper shafts. A gap between the shaft ends and the lower leg bolt
holes should be visible.
1
2
Содержание Rockshox 30 Gold RL
Страница 1: ...SERVICE MANUAL GEN 0000000006173 Rev B 2020 SRAM LLC 2018 2021 JUDY 30 RECON...
Страница 67: ...67 Damper Service Install the seal head onto the rebound damper shaft 5...
Страница 93: ...93 Lower Leg Installation Clean the entire fork This concludes the service of your RockShox suspension fork 9...