Model SR411
i
Patient Floor Scale
Operating and Service Manual
Part No. MAN411
i
_MICROBAN_200610
Page 15 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
DISPLAY MOUNTING TEMPLATE
Determine installation location for scale and display, keeping in mind the display cable length is
six (6) feet and the display power cord length is four (4) feet. The display may lay flat on a
desk or end table. If desired, provisions for wall mount have been incorporated, and can be
accomplished in the manner described below.
A.
The display should be installed by qualified personnel. The mounting hardware provided
will cover most wall applications.
B.
Determine a position on the wall comfortable to the user. Mark the location of the two (2)
mounting holes on the wall (holes are spaced 2.5” on center apart) using the template
provide below.
C.
Drill the two (2) pilot holes, no larger than ¼” diameter in the locations marked. Install the
two (2) self-drilling screw anchors.
D.
Install the two (2) #8 x 1” flat head screws supplied, leaving approximately ¼” projecting
from the wall.
2 ½”
