Model SRV947IFS-BT 24 X 48 Remote Display Platform Scale
Operating and Service Manual
Part No.: MAN947IFSBT_190708
Page 9 of 14
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
email:
Copyright
2019
S
Instruments, Inc.
BASIC SYSTEM OPERATION
TURNING SYSTEM ON
Make sure the scale is free and clear of any obstructions and all six feet are touching a level
surface. Press the “
ZERO
” button and hold for 3 seconds. The display will read “
ZERO
” then
display “
0.0
” when system is ready for weighing.
UNIT
Press the “
MODE
” button to toggle between pounds or kilograms. The system will remain in the
same mode as last used unless manually changed.
WEIGH
The “
WEIGH
” button is used to clear the “Recall” memory and start a new weighing cycle.
HOLD/RECALL
The “
HOLD/RECALL
” button is used to “lock in” and store the weight currently displayed in
system memory. With no weight on the platform pressing the button again will recall the last
stored weight and display it for 15 seconds.
AUTOHOLD
With autohold enabled, when the system detects a stable weight, that value will be stored in
system memory. This value can later be recalled by pressing the “
HOLD/RECALL
” button with
no weight on the platform.