SR Instruments SR Scales SRV715, Руководство по эксплуатации и обслуживанию, Страница: 9 / 16

Model SRV715 Series
Operating and Service Manual
Part No. MAN715_190719
Page 9 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com
email: sri@srinstruments.com Copyright 2019
S
Instruments, Inc.
BASIC SYSTEM OPERATION
Ensure that the scale is free and clear of any obstructions before operating.
Turn on the SRV715 scale by pressing the “ ZERO / ON
” button located at the end of one of the
transducer tubes (There is also a “
ZERO / ON
” button on the top of the display, accessible only
before placing the top platform on).
Turn on the remote wireless display device and select the correct interface connection. Ensure that
“
CONNECTED
” is displayed on the remote wireless display device.
Press the “
ZERO
” button on the display. The display will read “0.0” and be ready for weighing.
Press “ POUNDS
” or “
KILO
S” to change mode if needed.
NOTE : The display will automatically shut down after ten minutes of non-use.
Assist the animal onto the scale’s top platform; its weight will appear on the display.
NOTE : The display will automatically shut down after ten minutes of non-use. If the scale shuts
down or loses its Bluetooth connection to the Android device you must remove the animal from
the scale’s top platform and press the “
ZERO / ON
” button located at the end of one of the
transducer tubes. After doing so, you can reconnect your Android device.
It is recommended that the system be zeroed prior to each subject being weighed.