Model SR7005
i
Wall Mount In-Room Mini Scale
Operating and Service Manual
Part No. MAN7005i_200520
Page 6 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
SYSTEM DESCRIPTION and INTENDED USE
SYSTEM DESCRIPTION
The SR7005
i
Wall Mount In-Room Mini Platform Scale system employs the latest in microprocessor and
load cell technology to provide accurate and repeatable weight data. Four (4) identically matched
transducers are strategically placed to ensure an accurate representation of the patient’s weight.
The SR7005
i
low power microprocessor circuitry is powered by six (6) alkaline “C” cell batteries that will
provide up to 6,500 weight readings before needing replacement.
The patient’s weight is displayed on a 16-character dot matrix LCD w/LED backlight. The weight data may
be viewed either in pounds or kilograms with a displayed resolution of 0.1 for each.
The SR7005
i
Wall Mount In-Room Mini Platform Scale system
has an 18” x 20” (45.8 cm x 50.8 cm)
platform weighing surface.
The scale system has a programmable Automatic Power Down (APD) for adjusting the scale on-time.
INTENDED USE:
The SR7005
i
Wall Mount In-Room Mini Platform Scale system is specifically designed for in-room
weighing of patients and is a preferred means of gathering patient weight data of up to 660 lb or 300 kg.
Platform should be stored in the upright position when not in use to prevent a trip and fall hazard.
WARNING
THE COUNTER BALANCE DAMPER
ASSISTS THE END USER WHEN LOWERING
THE PLATFORM. THE END USER NEEDS TO
CONTROL THE RAISING AND LOWERING
OF THE PLATFORM.
WARNING
DO NOT EXCEED
MAXIMUM WEIGHT LIMIT OF
660 LB / 300 KG
WARNING
DEVICE COULD BE A TRIP AND
FALL HAZARD IF PLATFORM IS
LEFT IN THE DOWN POSITION