Model: SR630
i
-KG Pediatric Scale
Operating and Service Manual
Part No.: MAN630
i
-KG_200915
Page 6 of 20
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
email:
S
Instruments, Inc.
SR635
i
-KG CART ASSEMBLY
STEP 1
: Unpack scale system and check parts against
PACKING CHECKLIST
. If there are
any missing or damaged parts, please call Service Hotline 1-800-654-6360.
Allow scale to acclimate to room temperature before use.
STEP 2
: Remove shipping washers from
inner support tubes and discard
(
DO NOT DISCARD
button head
screws - used in Step 9)
STEP 3
: Remove the 10.25" and 13" tubes
from each inner support tube
STEP 4
: Place one shelf over an inner
support tube with a locking caster
STEP 5
: Place one 13" tube over the inner
support tube
STEP 6
: Place one shelf over the inner
support tube
STEP 7
: Place one 10.25" tube over the
inner support tube
STEP 8
: Complete the next assembly on the
same end using one inner support
tube assembly with a caster
STEP 9
: Secure the top plate to both inner
support tubes using the 1/4-20 x 1"
button head screws
STEP 10
: Complete other side in the same
manner making sure that both
locking caster are in front
STEP 11
: Make sure that all four screws are
tight
Figure 4: Cart Assembly
Top Mounting
Plate
10.25” Outer Tube
13” Outer Tube
3” Outer Tube
Inner Tube
Assembly
Locking
Casters
(Front)
Casters
(Back)
Shelf Assembly
Shelf Assembly
¼-20 x 1” Button
Head Cap Screw
NOTE
: The additional four
1/4-20 x 1" button head
screws are for mounting the
Pediatric Scale to the cart
