Model SR585
i
Bariatric Stand-On Scale
Operating and Service Manual
Part No. MAN585
i
-KG_MICROBAN_201006
Page 4 of 22
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
ASSEMBLY
Figure 1: Scale Assembly Diagram
STEP 1
:
Unpack scale system and check parts against
PACKING CHECKLIST
. If there are
missing or damaged parts, please call Service Hotline: 1-800-654-6360.
STEP 2
: (Figure 1)
Position Mast Assembly (#1) into the Base Assembly (#2) as shown, while
feeding display cable through cable hole on the right.
STEP 3:
(Figure 1) Insert the four (4) 3/8-16 screws (#4) into the holes in Mast Assembly and Base
Assembly as indicated
. Secure the Mast Assembly by tightening the screws into Base Assembly.
STEP 4
: Gently rest the scale on its side. Verify that serial number on bottom of the Display
Unit (#5) matches that on the Bottom Cover; located on the underside of the Base Assembly (#2).
#
PART NAME
1
Mast Assembly
2
Base Assembly
3
Height Bar Assembly (optional)
4
3/8-16 Screws (4)
5
Display Unit
6
Display Cable Connector
7
Printer (optional)
8
Printer Mounting Bracket (optional)
9
Printer Mast Bracket (optional)
10
Printer Cable (optional)
11
Left Side Hand Rail
12
Right Side Hand Rail
13
AC Power Supply
Continued next page
5
1
4
3
2
Cable
Hole
e
3
13