SR Instruments SR Scales SR241KG, Руководство по эксплуатации и обслуживанию, Страница: 9 / 14

Model SR241KG Portable Infant/Adult Scale
Service Manual
Part No. MAN241KG_201006
Page 9 of 14
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com
email: sri@srinstruments.com Copyright 2020
S
Instruments, Inc.
BASIC SYSTEM OPERATION
ADULT WEIGH
STEP 1 : Remove infant cradle from base. Place scale on hard smooth floor surface to ensure
accurate data.
STEP 2 : Press the large blue “ ZERO
” button and wait for the display to indicate “
0.0
”
STEP 3 : Position patient on the platform. Weight will be displayed in a few
seconds.
STEP 4 : To recall last weight data, press the “ KG
” button.
Note : Must be done before
“
ZERO
” button is pressed.
STEP 5 : If more weight needs to be added at any time during the weighing process,
add weight and press the blue “ ADULT WEIGH
” button. This will update the net
weight on the display
BABY WEIGH – OPTION 1
STEP 1 : If necessary, attach the baby cradle by sliding and snapping it into place.
STEP 2 : Place the platform on a stable counter or table-top.
STEP 3 : Follow the directions for ZERO-BABY MODE in the previous section.
STEP 4 : When the display indicates “ 0.0
”, you may place the baby on the scale, press
the “ KG
” button to recall the last stored weight data.
BABY WEIGH – OPTION 2
STEP 1 : Remove infant cradle from base. Place scale on hard smooth floor surface to ensure
accurate data.
STEP 2 : Have an adult stand on the scale holding any accessories that will be necessary
for the baby’s comfort (blanket, diaper, etc.). Press the yellow “
BABY ZERO
” button.
This will zero the scale system and TARE the adult’s and additional accessories weight.
STEP 3 : Place the baby in the adult’s arms. The weight displayed will be the infant’s net
weight.
STEP 4 : To recall last weight data, press the “ KG
” button.
Note : Must be done before
“
ZERO
” button is pressed.
STEP 5 : If more weight needs to be added at any time during the weighing process, add
weight and press the yellow “
BABY WEIGH
” button. This will update the net weight on
the display.