background image

 

5

 

Introduction to the IEEE 802.11g Wireless USB Adapter 

 

The IEEE 802.11g Wireless USB adapter provides users to launch IEEE 802.11g 
wireless network at 54 Mbps in the 2.4GHz frequency, which is also compatible with 
IEEE 802.11b wireless devices at 11Mbps. You can configure this adapter with 
ad-hoc mode to connect to other 2.4GHz wireless computers or with Infrastructure 
mode to connect to a wireless AP or router for accessing to Internet. This adapter 
includes a convenient Utility for scanning available networks and saving preferred 
networks that users usually connected with. Security encryption can also be 
configured by this utility. 

 

 

 

 

Key Features   

 

 

Complies with IEEE 802.11b/g wireless 

standard

 

 

 

Support driver for Windows 98se, Me, 

2000, XP and Vista.

 

 

 

Complies with Universal Serial Bus Rev. 

1.0, 1.1 and 2.0 specifications. 

 

 

Supports auto-installation and diagnostic 

utilities.

 

 

 

High  Speed  transfer  data  rate  up  to  54 
Mbps

 

 

 

Support wireless data encryption with 
64/128-bit WEP, WPA (TKIP with IEEE 

802.1x) and AES functions.

 

 

 

Support turbo mode for 72 Mbps data 

rate

 

 

 

 

Содержание IEEE 802.11G WIRELESS USB ADAPTER






































Отзывы: