USER MANUAL FOR THE TWO POSITION SWITCH (SSP17
–
2 POS)
Label
Important Information
FCC Notice to Users
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
(2)
Spyder Controls has not approved any changes or modification to this device by the user. Any changes
or modification could void the user's authority to operate the equipment.
To comply with FCC exposure limits for general population / uncontrolled exposure, this device should be
installed at a distance of 20 cm from all persons and must not be co-located or operating in conjunction
with any other transmitter. This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada Notice to Users
This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following
two conditions:
(1)
This device may not cause interference; and
(2)
This device must accept any interference, including interference that may cause undesired operation
of the devices.
This device should be installed and operated with minimum distance 0.2 m from human body.
Le présent appareil est conforme aux CNR
d’Industrie
Canada applicables aux appareils radio exempts de
licence.
L’exploitation
est autorisée aux deux conditions suivantes:
(1)
l’appareil
ne doit pas produire de brouillage;
(2)
l’utilisateur
de
l’appareil
doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible
d’en
compromettre le fonctionnement.
Cet appareil doit être installé et utilise à une distance minimale de 0.2 m du corps humain.
SSP17-2 POS
IC: 10245A-BSSPWZCR6
FCC ID: OV9BSSPWZCR6
