How to playback recordings from the device:
● You can use the included headphones or the built-in speaker
● Turn the device on with the power and play button
● Navigate to the file you wish to play by pressing left or right on the joystick. The files are
numbered
● Press the power and play buttons, and the file will begin to play
● Fast forward, and rewind is accomplished by holding and clicking left or right on the
joystick
● Click up or down on the joystick button to increase or decrease the volume
● Hold and click up or down to increase or decrease playback speed to 10% faster or
slower
● Tap the power and play button to stop the playback
● Tap the record button to exit the playback
How to set the time and date stamp on a Windows computer:
● Connect the device to the USB port of the computer
● Double-click the “TimeSetup.exe” file. The “Date_Time.cfg” creator will open
● Press start to sync the date and time with the PC
● A new file will be created called “Date_Time.cfg”
● Disconnect the device from the PC and create a new recording to sync the date and time
● Reconnect the device to a PC; if “Date_Time.cfg” is not visible, the date and time are
now set
How to manage and delete files on a Windows computer:
●
Connect the device to the PC
●
When connected, the PC will recognize the device as a removable disk
●
Open the “MemoQ” folder
●
Inside will be the “Voice” folder. Double-click to open the folder
●
Double-click the file you wish to play
●
To delete a file, right-click and select delete from the popup menu
How to adjust microphone sensitivity on a Windows computer:
● Connect the device to the USB port of the computer
● Double-click the “TimeSetup.exe” file. The “Date_Time.cfg” creator will open
● Under MIC sense is a drop-down menu where you can select high, normal, or low
● Press start to sync the settings with the device
● A new file will be created called “Date_Time.cfg”
● Disconnect the device from the PC and create a new recording to sync the settings