Bluetooth Glasses
Inductive Bluetooth Glasses
Quick Start
Step 1>
Overview of bluetooth glasses
Please refer to up right sketch and find all positions
of bluetooth switch, bluetooth indicator, recharge
hole and microphone hole.
Press bluetooth switch you can operate the device.
Its in middle of left frame. If pressed right position
your finger will get light on and off feelings.
Bluetooth indicator is tiny for hide purpose.
Its in left side of bluetooth switch.
Step 2>
Recharge battery for about 2 hours
A. Plug USB charge cable (the small end one) to recharge
hole, then connect USB end to pc port.
B. Indicator turns red after successfully connected.
If indicator does not turn on, please unplug and try again.
D. Full charge needs 2~3 hours. After full charged indicator
turns from red to blue.
Note: Make sure bluetooth ball glasses is power off while
recharge power. Its not function while recharge battery.
Step 3>
Pair with cellphone
A. Put bluetooth switch to pairing mode by press and hold bluetooth switch until indicator turn on and stay in blue.
If bluetooth indicator flash, turn off bluetooth glasses then repeat 1st step.
B. Enable bluetooth function in cellphone and search for new device. After found “T9" select it and press OK.
Enter password 0000 and press OK. After successfully paired, indicator will change from stay to flash in blue 2 times.
Step 4>
Test and use
Load battery into earpiece and wear to ear canal. Pair bluetooth ball-pen with cellphone then wear it.
On your cell phone dial the number you want to call. You will hear voice in earpiece after connected
Step 5
> Turn off/on bluetooth glasses
For save battery power, please turn off bluetooth glasses if do not use for long time
Turn off – Press and hold bluetooth switch until blue indicator flash twice
Turn on – Press and hold bluetooth switch, indicator will turn on. When bluetooth glasses connected to paired cellphone and
ready for use, blue indicator will flashes shortly.
SEA10 bluetooth glasses is advantaged inductive transmitter
for all invisible earpiece users. It can works with any bluetooth
enabled mobile phones.
Each set of SEA10 bluetooth glasses includes:
1 x bluetooth glasses
1 x glass cloth
1 x USB charge cable
Bluetooth glasses USB charge cable
All contro
l buttons a
nd interfac
e are in left s
ide frame
Bluetoo
th Switch
Bluetooth I
ndicator
Recharge H
ole &
Microphon
e
Left Frame of bluetooth glasses
1> Bluetooth indicator (blue/red)
2> Bluetooth switch position
3> Recharge hole
connect to
computer USB port
1
2
3
www.Spy-Earpiece.com
