SPXFLOW Seital Separation SE 40CX-Q2P2, Инструкция по эксплуатации

Страница: 47 / 126

Chapter 7
Rev. 3 of 02/05/03
SEITAL S.r.l.
Use and maintenance handbook: Centrifugal separator
SE 40CX
Page 7-1
7. MACHINE START
7.1. Warnings
Before machine starting, be sure to have understood the contents of this Handbook. For
explanations and deepenings contact the manufacturer.
The normal operation and maintenance personnel have to own the specific expertise required
by this Handbook, as well as the psychophysics requisites necessary and sufficient to make an
intervention on the machine.
ATTENTION
Generic danger
Only qualified and authorized personnel may perform regulations and interventions that are
not assigned to the simple operator.
7.2. Safety systems description
ATTENTION
Generic danger
Never tamper safety devices. Before setting at work the machine check their correct
positioning and always verify their efficiency.
In case of bad working inform the maintenance responsible.
7.2.1. Project devices
To reduce the risks, it has been realized an opening on the frame closed by a sight glass,
which permit to check if bowl is rotating or not.
7.2.2. Shields
The following shields are presents:
• a series of steel shields are fixed with screws that totally prevent the access to the moving
internal parts of the machine:
- n° 1 port of hydraulic coupling;
- n° 1 port of gear chamber;
- n° 1 bowl protection cover;
- n° 1 plug to mount/remove the bowl valves;
• a motor protection cover.
7.2.3. Warning bill-stickings
In accordance with EEC 89/392 directives and his amendments, the following notice bill-
stickings has been predisposed (Tab. 22):