SPXFLOW Seital Separation SE 40CX-Q2P2, Инструкция по эксплуатации, Страница: 36 / 126

Chapter 6
SEITAL S.r.l. Rev. 3 of 01/12/04
Page 6-8 Use and maintenance handbook: Centrifugal separator
SE 40CX
14) By the suitable spanner (09.060.0 ÷
06.090.0), compress the disks stack
(Fig. 6.18). To make this, perform the
operations mentioned below.
- Lay bell (1) on bowl hood.
- Screw tight threaded rod (4) on the
distributor.
- By using extension pipe (09.020.0)
screw nut (3) as much as possible
and anyhow until the bowl hood
completely lay on the corresponding
seat of the bowl body (fig. 6.19).
15) Smear antiscuff grease on threads of
bowl body and big lock ring (Fig. 6.20 -
part 1) and on contact surfaces between
bowl hood and big lock ring (Fig. 6.20 -
part 2).
Figure 6.20
Figure 6.19
Figure 6.18