SPXFLOW Seital Separation SE 40CX-Q2P2, Инструкция по эксплуатации

Страница: 20 / 126

Chapter 4
SEITAL S.r.l. Rev. 1 of 14/01/97
Page 4-4 Use and maintenance handbook: Centrifugal separator
SE 40CX
ATTENTION
Danger of machine turnover
Danger of impact and squashing for people
During lifting and transport must be used great caution to avoid injury to people and things.
This operation must be performed by expert personnel.
Verify that nobody is exposed to a risk in danger zone.
WHEN LIFTING ALL THE AREA SURROUNDING THE MACHINE MUST BE
CONSIDERED DANGER ZONE.
Until the groups (bowl, separator) are not completely lifted it’s better to verify the correct
balancing of them. The lifting must be performed with continuity (without impulses).
Keep the load lower than possible during movements, both for a better load stability, and for a
higher visibility.
The manufacturer does not answer about breakages due to the transport of the machine after
the delivery.
All the elements that are potentially moveable or not resistant to his weight must be securely
fixed to the machine to prevent dangerous disjunctions or unbalancings.
For the machine not packed is prescribed a covered transport.
4.5. Warehouse storage
The machine storage, with or without packing, must be done in a place which has the
humidity and temperature conditions reported in § 5.1.
If the machine remains unused for a long time (more than 3 months), after it has already
worked al least once, perform the following operations:
- accurately clean the separator;
- dry with clothes and greased all the bowl parts and the unpainted parts of the machine, to
avoid corrosions;
- keep the bowl in a dry place;
- to avoid the gaskets become brittle, preserve them in a cool, dry, dark and dust-sheltered
place;
- discharge lubricant oil and accurately clean the gear chamber;
- disconnect the inlet-outlet pipes of the product;
- close the operating water cocks and check that losses are not present.
When starting the machine follow the instructions reported in § 7.