SPXFLOW Seital Separation SE 40CX-Q2P2, Инструкция по эксплуатации

Страница: 16 / 126

Chapter 3
SEITAL S.r.l. Rev. 1 of 14/01/97
Page 3-4 Use and maintenance handbook: Centrifugal separator
SE 40CX
3.4. Noise level
The machine has been subjected to a noise emission test with reference to the noise test code
included in Annexe A of the standard prEN 12505.
The determination of noise emission values (sound pressure level) has been done with empty
machine, rotating at the operating speed. Care has been taken to ensure that the any electrical
conduits, piping or air ducts which are connected to the machine do not radiate significant
amount of sound energy.
The measurement has been done at 1,0 m. in front of the machine and 1,6 m. above the floor.
A-weighted time-averaged emission sound pressure level: dBA
3.5. Destination and foreseen place of use.
The machine must exclusively operate inside a closed place, which must possess features in
conformity with the prescription of this Manual (see § 5.1).
The floor must be plane, without asperities, sufficiently solid to avoid sinkings.
3.6. Improper uses and contra-indications
• Never use the machine to separate liquids which have different characteristics (density,
temperature, corrosion, etc.) from those specified.
• The bowl has not to rotate at a higher speed than the maximum operating speed (6.500
rpm).
• The bowl has not to rotate empty. It is allowed to put into rotation the empty bowl for a
period of 15 min. only in starting phase.
• Never elude or disactivate the safety shields.
• Never use the machine if it is damaged.
• Do not connect the machine to an electric panel that is not specifically supplied by
SEITAL.
• Use only SEITAL spare parts.
ATTENTION
Avoid water jets on control panel and on the motor.
Every use different from the specified, not included o deducible from this manual, it is
considered “NOT ALLOWED”.