SPXFLOW CombiFlexBloc Series страница 40 Скачать руководство пользователя

Страница: 40 / 79

Disassembly and assembly

CFB/EN (1808) 2.4

7.8.2

Assembling the stub shaft and the motor

1 For electric motors with IEC-size 80 upto and including 112M: Remove the key from

the motor shaft.

2 Put the motor in vertical position, shaft end up. Fit the stub shaft (2200) on the motor

shaft.

Do not fix the stub shaft yet!

3 For electric motors with IEC size 80 upto and including 112M: make sure the set

screws (2280) are positioned over the key way in the motor shaft.

4 Place shims between the lantern piece and the motor flange and fit the lantern piece

(0250) to the electric motor. See Table 5 for the proper thickness X of the shims

5 Mount the pump cover (0110), the mechanical seal (1200) and the impeller (0120).

6 Push the impeller on the stub shaft until the back blades touch the pump cover.

7 Fix the stub shaft on the motor shaft with the set screws (2280).

8 Slightly loosen the fastening bolts (0850) of the electric motor and remove the shims.

9 Tighten the fastening bolts (0850) of the electric motor crossways with the

prescribed tightening moment, see paragraph 10.3.1 "Tightening moments for bolts
and nuts".

10 Place the gasket (0300) and fit the pump casing (0100). Fix the pump casing with

nuts (0810). Tighten them crossways. see paragraph 10.3.1 "Tightening moments for
bolts and nuts".

Table 5: Shim thickness X for adjusting the stub shaft

Pump type

Shim thickness X

all types

0,5 mm

Содержание CombiFlexBloc Series
















































































Результаты поиска

Содержание CombiFlexBloc Series

Отзывы:

Похожие инструкции для CombiFlexBloc Series

Бренды по названию

Популярные бренды

SPXFLOW CombiFlexBloc Series, Инструкция по эксплуатации

Результаты поиска

Содержание CombiFlexBloc Series

Отзывы:

Похожие инструкции для CombiFlexBloc Series

Бренды по названию

Популярные бренды