manualshive.com logo in svg

SPXFLOW CombiFlexBloc Series, Инструкция по эксплуатации, Страница: 31 / 79

Поделиться
Скачать
SPXFLOW CombiFlexBloc Series Скачать руководство пользователя страница 31

CFB/EN (1808) 2.4

Disassembly and assembly

29

CombiFlexBloc

7.6

Stuffing box packing S2, S3, S4

7.6.1

Instruction for assembling and disassembling stuffing box packing

➢

First read the following instructions regarding stuffing box packing. Follow these instruc-
tions closely when removing and mounting stuffing box packing.

• For removing old packing rings your supplier can supply a special packing puller. 

See figure 6.

• Only use packing rings with the right dimensions.

• Grease the stuffing box, the shaft sleeve and the packing rings with some graphite 

grease or silicon grease. For the allowed grease types see paragraph 10.2.1 
"Recommended mounting grease".

• Bend the new packing rings open axially. See figure 7.

• For pressing the packing rings down, use a halve piece of tube with the right 

dimensions.

Figure 6:

Removal of packing rings with a packing puller.

Figure 7:

Axially bending open packing rings.

4044

Содержание CombiFlexBloc Series
















































































Отзывы:

Нет отзывов