background image

12

APV_SI2_UK-6_012019.indd

UK

Safety Valve

DELTA SI2

Instruction manual UK-rev. 6

APV

12.   Trouble Shooting

Failure

Remedy

Operating position: closed

Leakage at the discharge side.

Replace seat ring (3).

Check control of seat lift actuator.

Leakage between housing flange and

flange of spring cylinder.

Check housing seal (7) and shaft seal (34),

replace damaged seal.

Seat lift cylinder does not work

Check whether ring (19, 41) is stuck.

Replace piston seal (15).

Valve feedback does not work or is unprecise.

Carry out fine adjustment.

Check whether ring (19, 41) is stuck.

The item numbers comply with the spare parts lists. The 

replacement of seals must be carried out

according to Service Instructions (see chapter 11).

!  If damaged seals are replaced, generally all seals should be 

changed. Complete seal kits for the valve service are available 

(see spare parts lists).

13.   Spare Parts Lists

The reference numbers of the spare parts for the different valve 

designs and sizes are included in the attached spare parts drawings 

with corresponding lists.

Please indicate the following data to place an order for spare parts:

- number of required parts

- reference number

- designation.

Data are subject to change

Содержание APV DELTA SI2

























Отзывы: