10
APV_BLV1_GB-0_012020.indd
Ball Valve
APV DELTA BLV1
Instruction Manual: GB - rev. 0
APV
GB
5. Auxiliary Equipment
5.3.
Turning actuator for control unit
For the assembly of a control unit on the ball valve, a special turning
actuator is required.
The standard turning actuator must be replaced.
Turning actuator for control unit
actuator K080 F/L RME for
BLV1 DN 15 - 50; 1/2"- 2"
H123937
000-15-37-070/17
actuator K125 F/L RME for
BLV1 DN 65 - 80; 2 1/2"- 3”
H128942
000-15-37-106/17
actuator K180 F/L RME for
BLV1 DN 100; 4"
H134034
000-15-37-103/17
- For the assembly of the control unit on the special turning actuator,
a CU adapter is required.
Adapter for control unit CU4-T
CU4-T-adapter
DN 15 - 50; 1/2" – 2”
H320475
000-08-48-601/93
CU4-Tmax-adapter
DN 65 - 100; 2 1/2" - 4"
H321987
000-08-48-611/93
6. Cleaning
6.1. Cleaning recommendation
The valve passage is cleaned by the cleaning liquid during cleaning
of the connected pipelines.
Depending on the degree and contents of soiling, the cleaning
liquids, times and processes for the individual application must be
scheduled.
Caution!
The cleaning liquid applied must be compatible with the respective
seal material.
!
