Tools & Setup
© Radiodetection 2016
21
RD1100 Operation Manual
GPS
Pressing GPS will toggle between turning the internal GPS on or off; this will be shown on the
button and on the screen beside the GPS field. Located beside that, the GPS strength indicator
shows how many satellites the GPS is picking up. The meaning of the colour and bars is shown
in the table below:
Indicator Color
# of bars
# of Satellites
Red
1
4
Orange
2
5
Green
3
6,7
Green
4
8,9
Green
5
10+
Reset to Defaults
This will reset all settings and preferences back to the initial settings when the system was
shipped. Pressing this will ask you to confirm the Reset to Defaults. If
Yes
is selected, the next
screen will ask if you would like to remove all saved wireless networks and email addresses.
Figure 6-6: Reset to Defaults, a) Image on left is the first confirmation screen. b) If you press
Yes
, you will see the second confirmation screen, on the right, asking about deleting emails and
WiFi settings.
6.3 System Test
The System Test sub-menu (Figure 6-7) allows the user to perform certain tests to ensure
proper operation of the system. Select the component to test then press
Start
. After completing
a test there is an indication of whether the system passed or failed the test. Each test is
described below in more detail.
