
HYDRAULIC PUNCH TOOL
Max. Capacity: 20 Tons (HP20)
35 Tons (HP35)
Definition: A hydraulic punch tool is a tool powered by a hydraulic pump to punch profile holes in metal or
similar materials.
Read and carefully follow these instructions before installation and use of this tool. Many problems with new
equipment are caused by improper operation and installation.
NOTE: Inspect the tool upon arrival. The carrier, not the manufacturer, is responsible for any damage
resulting from shipment.
SAFETY DEFINITIONS
Safety symbols are used to identify any action or lack of action that can cause personal injury. Your reading
and understanding of these safety symbols is very important.
DANGER - Danger is used only when your action or lack of action will cause serious human injury or
death.
WARNING - Warning is used to describe any action or lack of action where a serious injury can occur.
IMPORTANT - Important is used when action or lack of action can cause equipment failure, either
immediate or over a long period of time.
Form No. 102885
HP20
HP35
Operating Instructions for:
Sheet No.
1 of 5
Rev. 2
Date: 13 Dec. 1999
Tech. Services: (800) 477-8326
Fax: (800) 765-8326
Order Entry: (800) 541-1418
Fax: (800) 288-7031
SPX Corporation
5885 11th Street
Rockford, IL 61109-3699 USA
Internet Address:
http://www.powerteam.com
®
© SPX Corporation