6
(Pic.3)
(Pic.4)
3.2 Basic function usage
Paper Type: Thermal paper, Black mark paper and Label paper.
Label Mode: Max 56mm wide, 45mm high paper supported, use label paper as
default under label mode.
Receipt Mode: 48mm wide normal paper supported, use normal paper as
default under receipt mode.
Set the Paper type by Setting Tool.
3.2.1 Switch On
Press ‘ - ’ on the button to turn on the printer, you will hear ‘one low one
high ’prompt tone, then the printer begin to work.
3.2.2 Switch Off
Press ‘ 0 ’ on the button to turn off the printer.
3.2.3 Self-Test
After receiving the printer, users can check its current setting and status at
anytime. Self-test method is as below: In the status of power off, then hold
down the [FEED] button and press the power button at the same time. Then
loosen the[FEED]button and Power button when you hear ‘one low one
high ’prompt tone, the current setting and status will be printed out.
3.2.4 Paper Feeding (Manual Feeding)
Under the normal work status and using the thermal receipt paper,
press[FEED]button, the paper feeding begins, and stops when loosen [FEED]
button. When the printer uses black mark paper and label paper,
