6
Chapter 3
Operation Method
3.1 Using Preparation
3.1.1 Battery Installation
Put the battery into the battery slot from the side with pins and press the other
side into case. (as below Fig.)
3.1.2 Paper Roll Installation
1. Hold both sides of the paper case cover, and open it. (Figure 1 and 2),
Keep your hands dry in case of slipping.
2. Loading paper, thermal side down. Pull out a part of paper (End of the
paper exceed the paper tearing bar) (Figure 3).
3. Close paper case and cut off the redundant paper.
Fig 1
Fig 2
Fig 3
