SPRT SP-EU804, Руководство пользователя

Страница: 24 / 26

21
3.0 Installation and use notes
1.The connection between the paper exit and the paper exit position of the device
suggested to be one of the following figures.
2. When the paper exit port and Cabinet outlet are connected in the above figure, in the
structure of Figure 1 and Figure 2, there should be a gap between the paper exit of the printer
and the paper exit of the device. See the figure below.
3.The printer must be firmly installed to prevent the printer from shifting due to external force and
causing paper blockage.If installed on the sliding rail, it is necessary to make the sliding rail limit
mechanism.