EN
INSTALLATION INSTRUCTIONS
Introduction
Thank you for buying this
SpringCard FunkyGate
Reader for your access control system.
SpringCard
FunkyGate
is a wall-mount reader. In order to install
it easily and correctly please follow the instructions
contained in this guide.
Product listing
This Installation Instruction guide targets the
following products :
Order #
Product
SC14002
FunkyGate-IP NFC
: new generation
wall-mount RFID/NFC/contactless card
Reader, with Ethernet interface (10 or
100 Mbit/s)
SC14003
FunkyGate-IP+POE NFC
: new
generation wall-mount
RFID/NFC/contactless
card Reader, with Ethernet interface (10
or 100 Mbit/s), powered by the
network
SC14004
FunkyGate-DW NFC
: new generation
wall-mount RFID/NFC/contactless card
Reader, with RS-485, Data+Clock and
Wiegand interfaces
Precautions for installation & use
SpringCard FunkyGate
Readers dialog with
contactless cards, tags ou other objects using the
RFID/NFC technology in the 13.56MHz range.
RFID/NFC operates thanks to radio waves. These
waves can't travel through metal, and the Reader's
operations may be altered by other communication
devices in the nearby.
Do not install your
SpringCard FunkyGate
Reader
in the vicinity of another access control reader,
even from another brand or another technology. The
distance between two readers in the 13.56MHz range
shall be 30cm or more ;
on a metal plate, or near any kind of metal area
(aluminium door or window frame, thermal
insulation screen etc). There must be at least 8cm
between the Reader's back and any metal plate, and
there must be at least 12cm between the Reader's
sides and any object containing metal in the nearby ;
near another electronic equipment, because the
waves it emits for operation, or even its internal
shieldings, may alter the performances of your
SpringCard FunkyGate
Reader.
Wiring, configuration and test
Once your
SpringCard FunkyGate
Reader is installed,
the next step is to connect it to your access control
system, and to load the correct configuration
depending on
the kind of cards/tags you'll be using ;
the output format your controllers are waiting for.
To do so, please refer to « FunkyGate-DW Integration
and Configuration Guide » (
PMA13292
) et
« FunkyGate-IP / FunkyGate-IP+POE Integration and
Configuration Guide » (
PMA13257
).
Go to
www.springcard.com
to download the latest
version of the Integration and Configuration Guide to
the Reader you are using.
Contacting Support
Thank you for using the onlign form at adress
www.springcard.com/support
for any question or technical
support request.
