___________________1. Safety Data
Introduction
Foreword
This manual has been written to provide the
owner and user with clear instructions on
the operation and maintenance of the
Spread-A-Bale unit.
By following the instructions in the manual
you will not only get many years of service
from your Spread-A-Bale, but you will
make your work much easier.
If any part of this manual is not clear, then
please contact your dealer or the
manufacturer for explanations. It is very
important that you understand and comply
with these instructions.
Use only genuine authorised parts when
replacements are required, you are
strongly advised to purchase any spare
parts from an exclusive dealer, no
purchases from the manufacturer.
The variety of conditions and vehicles that
this unit can be operated with means that
Spread-a-Bale cannot provide up to date
information on the performance and
efficiency of the units it manufactures. The
company therefore accepts no
responsibility for loss or damage caused
by its publications or any error or omission
therein. Should the unit be used in
particularly adverse conditions contact
your local dealer for specific instructions.
Together with the Operating Instructions,
you receive a Spare Parts List and a
Machine Registration form. Field service
technicians will instruct you in the
operation and servicing of your machine.
Following this, the Machine Registration
form is to be returned to Spread-a-Bale.
This confirms your formal acceptance of
the machine. The warranty period begins
on the date of installation.
We reserve the right to alter
illustrations as well as technical
data and weights contained in
these Operating Instructions for
the purpose of improving the
Spread-A-Bale.
Warranty Guidelines
1.
The period of liability for material
defects (warranty) relating to our
products is 12 months
.
In the case of
written deviations from the statutory
provisions, these agreements shall
apply.
They shall become effective upon
installation of the machine with the end
customer. All wear parts are excluded
from the warranty.
See additional information in Sections
1.2 and 1.13
2. Warranty claims must be submitted to
Spread-a-Bale via your dealer. It is only
possible to process claims which have
been correctly completed and submitted
via an authorised Spread-a-Bale dealer
repair.
3. Claims for fitting non original parts will
not be considered unless prior
agreement has been obtained.
4. The repairer must be advised that the
work it to be the subject of a warranty
claim beforehand
5. The damaged parts must be retained
for inspection and returned carriage paid
if required.
The right to withdraw warranty is
reserved if:
a) Non-original parts fitted
b) The machine has been abused,
badly maintained or used for
purposes other that for which is was
designed.
