Spraying Systems Co GunJet 60, Руководство пользователя, Страница: 3 / 16

3
INTRODUCTION
The Model 60 series GunJet
®
is a heavy-duty, impact resistant spray gun with a
sturdy nylon handle and trigger guard. The Model 60 GunJet is a high-pressure
spray gun, which remains responsive and easy to operate even at maximum
flow and capacity conditions. The light trigger pull provides positive control.
The heat resistant handle remains comfortable even at high temperatures. A
special trigger lock feature locks in the “off” position to prevent accidental
discharge and retracts flush into the handle when the gun is in use. The Model
60W incorporates a continuous “weep” feature to minimize the change of
freezing and, with the exception of the valve seat subassembly, the 60 and
60W GunJet spray guns are identical and require the same installation and
operating procedures. The Model 60 and 60W GunJet spray guns will
accommodate standard Spraying Systems Co. accessories for both the inlet and
the outlet connections within the accessories’ pressure and temperature
limitations.
Features of the Model 60-GunJet spray guns:
•
Operating pressure range up to 2500 psi (173 bar).
•
Flow capacities to 6 gpm (23 l/min) with 90 psi (6 bar) pressure drop.
•
Maximum recommended temperature 300°F (150° C).
•
Single piece, forged brass inlet body (for 60 & 60W).
•
Stainless steel inlet body (for 60 SS & 60W SS).
•
Stainless steel shut-off needle.
•
Bronze-filled PTFE valve seat.
•
Viton stem seal with PTFE back-up ring.
•
Short hand grip (handle to trigger).