24
5.
ASSEMBLY INSTRUCTIONS
i
Prior to installation, please check of which material
your desired installation location is made and whether
it is resilient.
Step 1 + 2: Open door hooks and snap into place
Put the bar on the floor. Now pull the two door hooks downwards in the direction of the arrows and
then apart until both hooks are in the vertical position. This process will be somewhat, especially the
first time. Make sure that you apply pressure to the spring before folding it out so that the opening
mechanism works without resistance. As soon as the hooks have reached the correct position, they
lock in place automatically. Before opening and closing, apply downward pressure to the bar to
compress the spring.
Step 3: Hooking in the rod
Stand on the side of the door frame where the door opens in the opposite direction. Pass the hooks
through the door opening so that the ends of the door hooks rest on the door frame.
1
2
3
